Scientific Hay Conserver Bale Feeders

Stop Wasting Time & Money on Regular Feeders!

Con-serve : To avoid wasteful use. To use frugally. To protect from unnecessary loss. To help you have higher profits!

We have made the most efficient hay feeder on the market even better!

Bigger pipe! More efficient than before! Does a better job than most hay saving feeders for a lot less cost.

OSU Animal Sciences Design

The Oklahoma State University Department of Animal and Food Sciences helped us revamp our feeders to maximize feeding efficiency.

They measured the legs, snouts, and heads of the 11 most-bred cattle breeds in America and reconfigured the feeders based on those dimensions, putting bars in the proper places for efficient feeding. They also configured the feeders to keep calves and animals from getting inside them.

Saves Money!

Feed up to 30% less hay. Put your pencil to that!

Saves Time!

Fewer trips to the pasture. Less wear and tear on your pick-up.

Safe & Durable!

ALL BIGGER & THICKER PIPE! Built with all new prime pipe. These feeders range in weigh from about 400 lbs. to 500 lbs. for the Monsters, but hey, you can’t make them light and make them last!

New Skid Corners!

Pick up and haul with any bale bed or front loader.

What Our Customers Have to Say

NEW – Article:
“Joe Hardcastle on the best way he’s found to feed his Angus and Brangus crossed with horned Hereford cattle: Using GoBob’s hay feeders”
– READ MORE on Joe Hardcastle

“My wife and I can’t get over how little waste there is with these new feeders and how handy they are to use with our Hydrabed.”
Harold Stapelford, Fall River, KS.

“In January it looked like I was going to have to buy hay then I bought five of these feeders. I really believe they saved 25 to 30% of my hay. This spring I had 25 bales of hay left over!”
Timber Hill Limousin, Mound Valley, KS.

“I used two of these feeders this spring in my calving lot and could not believe how long 2 bales lasted. The cows really clean it up and there is little or no waste.”
Romans Angus Ranch, Tony Stidham, Independence, KS.

Cattle prefer a square meal:
“We bought eight of your feeders last year but we still have a one of the ring feeders that the cattle have not tore up yet. It’s really weird, but the cattle will not eat out of the ring feeder unless the HAY CONSERVER feeder is empty!”
Robert Barnhouse, Bolivar, MO.

“I bought three of your hay feeders a little over two years ago and they FLAT DO NOT WASTE HAY. I have also looked at all the other so called hay saving feeder copy cats at the show AND THERE IS NO COMPARISON. YOUR FEEDERS ARE THE BEST!”
John Rummel, Ash Grove, MO.

Cattle REALLY DO Prefer a Square Meal!!
…We really like our insert. The Hay Conserver Feeder Saver really does save us hay – and we can prove it, since we have a Hay Conserver Feeder Saver and 2 regular round bale rings in a pasture. The cows always eat the hay out of the hay saver first, too.
Randi Miller, Miller Lowline Angus Ranch – POWERful Beef!

“I have bought a few of the GoBob Hay feeders and couldn’t be happier. I ordered my first two and set them next to the other round bale feeders I was using. And I was amazed at the amount of hay they saved. I now have 10 of the feeders in use! I can really say these can help a guy save some bucks and some hay!”
Elmer McWilliams, Asbury, MO.

Feeder Graveyard

This picture was taken near Hereford, TX on a customer’s property as we were delivering GoBob Hay Monsters (his second load).

We got to forty old feeders and quit counting. Our customer explained that over the years they have tried every kind of feeder there was, including the black poly pipe feeders. None of them held up. Well he won’t be putting anymore feeders in the graveyard.

He now has GoBob Hay Conserver Feeders.

UPDATE!

Remember that graveyard?

Here is what happens when you try GoBob’s Hay Conserver feeders – You end up with a hay feeder grave yard after you replace ALL your feeders with Hay Conservers, like this customer in West Texas.

GoBob Hay Feeders: They Work or Your Money Back! Guaranteed!

Try one, try ten, if the GoBob Scientific Hay Conserver hay feeders don’t leave you 100% satisfied, bring them back for a full refund!

20,000 of these feeders with this money back guarantee have been sold. To date we’ve had no takers!

Our 100% guarantee is good for 90 days for feeders purchased from May through July of a given year and 30 days for feeders purchased from August through April.

5-Year Structural Warranty

GoBob guarantees livestock will not damage your hay feeder for five years! (Damage by equipment excluded.)

Horse feeders are excluded. Because of their design, we cannot adequately protect them from damage by loading equipment.

Feeders with structural claims must be returned to GoBob for repairs. (To date, we have never needed to do this!)

Note: Paint is not covered under the structural warranty.

7-Year Rust Out Warranty

GoBob guarantees our Scientific Hay Conserver hay feeders will not rust out for 7 years.

If your feeder should rust through in the first 3 years, bring it back and we will replace it with a new feeder! After three years, feeders will be replaced on a prorated basis.

To date, no GoBob feeder has rusted out!

Note: reasonable care must be taken during the off season. We recommend the feeders be turned upside down during the off season.

NOBODY BUT GOBOB OFFERS THESE HAY FEEDER GUARANTEES!

*Warranty does not apply to bargain feeders

Frequently Asked Questions

To skirt or not to skirt?

Some customers have asked me why we don’t put a skirt around the base of our feeders, one competitor (whose feeders cost twice as much) raves about how skirting helps save hay. The problem is, it simply does not. Been there, done that. We have found that the hay that eventually gets nosed out the sides are the sticks and bad hay the cattle will not eat anyway. Skirting not only adds to the price of the feeders, it causes a buildup of sticks and rancid hay that you have to muck out or move the feeder!

Do the Hay Conserver Feeders work good with calves?

They work great with calves but you need to be aware of this. The neck bar spacing on the standard Hay Conservers, Hay Monsters and Double/Triple Hay Monsters is 16 inches. We believe this is the optimum spacing for all sizes of cattle. At this spacing some calves WILL get in it UNLESS you keep it full of hay. If you are only using our feeders to feed calves 900 lbs. or less or you do not feel you can keep the feeders full of hay, you need to order our feeders with “calf spacing”. The feeders are the same price as the standard feeders, you just need to ask for them.

Warning: Keep feeder full with hay! Failure to keep full may result in animals entering feeder causing injury.