Utilizing a new pipe product GoBob Pipe has been able to capture, we are able to provide a continuous fence panel that is twice as heavy, and several times stronger than conventional fence panel pipe, all without a big increase in cost.
Monster Fence panels are fabricated using four 24 foot sections of New Prime 1.9”OD 11 Gauge wall thickness pipe. These rails are reinforced with five vertical stays consisting of 2” x ¼” flat bar with a minimum yield of 36,000 lbs. Six inch long connectors are cut from 1.5”OD. Monster Fence panels will have an average weight of 289 lbs. per panel.
“Monster Fence panels are designed for the cattle producer or sale barn operator that never wants
to have to repair or replace any sections of their pens.”
- Bob Studebaker
Owner, GoBob Pipe
GoBob saves you more money by using four rails, but graduating the spacing. The rails get closer together near the bottom of the panels, where young cattle will encounter the fence. The rails are further apart at the top of the panel where older larger cattle come in contact. A top rail is not required in most applications but can easily be adapted if a higherfence is required.
Comparison of standard Continuous
Fence and Monster Fence Pipe
Monster Fence graduated rail spacing confines almost all cattle sizes.
Sold exclusively by:
GoBob Pipe & Steel Sales 1-877-851-2365
Want to know more about De-coiled Pipe? Click below!
PRODUCTS: From time to time, small changes in design or materials used in these products may occur and we cannot always make the changes to photographs or content very quickly. Slight variations may occur to the products depicted on this page.